Digital download for a 3D-printable insert designed for the 5.5” Mighty Hoop.
This insert helps keep stabilizer/backing flatter and more controlled while hooping, reducing creep/shifting and improving repeatability.
Includes
1x STL file (print-ready)
Print recommendations + tolerance tips (in description)
Recommended print settings
Material: PETG recommended (PLA works but can crack if forced)
Layer height: 0.20mm
Walls: 4
Infill: 15–25%
Supports: None
Print orientation: Flat (as modeled)
Fit / tolerance note
Fit can vary slightly based on printer calibration and hoop wear.
If it’s too tight: use Horizontal Expansion -0.1mm to -0.2mm (or XY comp).
If it’s too loose: use +0.1mm expansion or increase walls.
License
Digital files are for personal use (and printing physical parts) only.
Do not resell, share, or redistribute the digital files.
Due to the nature of digital downloads, all sales are final.
Digital download for a 3D-printable insert designed for the 5.5” Mighty Hoop.
This insert helps keep stabilizer/backing flatter and more controlled while hooping, reducing creep/shifting and improving repeatability.
Includes
1x STL file (print-ready)
Print recommendations + tolerance tips (in description)
Recommended print settings
Material: PETG recommended (PLA works but can crack if forced)
Layer height: 0.20mm
Walls: 4
Infill: 15–25%
Supports: None
Print orientation: Flat (as modeled)
Fit / tolerance note
Fit can vary slightly based on printer calibration and hoop wear.
If it’s too tight: use Horizontal Expansion -0.1mm to -0.2mm (or XY comp).
If it’s too loose: use +0.1mm expansion or increase walls.
License
Digital files are for personal use (and printing physical parts) only.
Do not resell, share, or redistribute the digital files.
Due to the nature of digital downloads, all sales are final.
